This article explains set up and mappings for Qgiv’s Kindful integration.
Click here to download a spreadsheet of information we send to Kindful by default during export, when applicable.
Click here to download a spreadsheet of additional fields in Qgiv you can map to Kindful.
Data exported from Qgiv will be added to funds/campaigns/appeals of your choosing in Kindful. If you need to create a new appeal and/or campaign during the export process, you do have that option.
Contents:
- Getting Started
- General Settings
- Export Settings
- Default Values
- Extra Info
- Optional Mappings
- Custom Mappings
- Running an Export and Export History
- Backing Up, Re-Authenticating, or Deleting the Integration
- Enabling the Service Integrations Notification
Getting Started
To set up the integration, click the Integrations icon along the left side of your screen.
Locate the Kindful tile in the CRM section and click Connect.
Click Connect again.
You'll be taken to a screen where you'll enter your Kindful credentials.
General Settings
You'll be taken to a screen where you can configure your settings.
Settings are organized into tabs along the left side of the page. You'll be prompted to Save after you make changes on a tab.
On the General tab, use the calendar to choose the Export Data Starting On date. If you'd like to export data from a date prior to the current date, you can set your calendar accordingly so historical transaction data will be exported.
IMPORTANT: The date you set aligns with the transaction dates you'll be exporting. If you set the date to today, only transactions from today and future dates will be exported.
The Export Data Ending On field lets users input a date to end exports from the integration. Leave this field blank if you want the integration to export indefinitely.
In the Frequency drop-down, choose Manual, Hourly, Daily, or Every 15 Minutes exports.
If you choose Daily exports, you’ll also be able to choose the time (Eastern) for the export to occur.
Beneath the Frequency drop-down is the Maximum Transactions field. This required field specifies the maximum number of transactions Qgiv will export to the integration at a single time. The default setting is to export a maximum of 100 transactions. You can adjust this number higher or lower, but the number field cannot be blank.
Also note that smaller limits provide a safer export, reducing the likelihood of export issues due to a service interruption.
Export Settings
The next tab houses the Export settings.
Exclude Offline & Matching Donations, when toggled on, excludes offline and matching donations from exports.
IMPORTANT: If you choose to export offline and matching donations, only verified transactions will be included.
The Exclude Facebook Donations toggle excludes donations made through Facebook.
The Export GiftAssist as Separate Line Item toggle makes it possible to export GiftAssist as a separate line item from the donation itself.
This is particularly useful when exporting transactions that have multiple line items, such as an event registration with an additional donation. If Export GiftAssist as Separate Line Item is enabled, the GiftAssist amount will appear as a separate part of the transaction. If Export GiftAssist as Separate Line Item is not enabled, GiftAssist will be divided evenly among each of the transaction's line items.
The next toggle is for overriding user opt-in settings during export.
The last toggle lets you Mark Transactions as Acknowledged.
Default Values
On the Default Values tab, choose a Fund and Campaign from the drop-down menus. The selections you make here will be your default mapping locations for transactions that cannot be mapped elsewhere. You can select Unmapped if you do not want any value to be used.
All activity will be exported to these default values if you don’t add any additional mappings and will be used as the backup mapping locations if a particular transaction hasn’t been mapped elsewhere. This information is pulling directly from your instance of Kindful.
Extra Info
If there’s any extra information you’d like to add to the Transaction Admin Note Field field in Kindful upon export, you can choose from the options in the drop-down menu on the Extra Info tab.
You can read more about what those extra info fields mean here.
You can make multiple selections. They’ll appear one at a time below the drop-down menu as you select them.
Not all information is available for each transaction type (e.g. Participant Name will only show up for peer-to-peer registrations).
Optional Mappings
Once you’ve saved, click the Mappings tab to display your Optional Mappings options. This is where you’ll configure mappings if you’d like specific data sets mapped to something other than the default values in the settings area.
Mappings can be grouped by Mapping Type or by Form using the Group by drop-down menu.
You can also filter your mappings to display only specific Mapping Types or only certain Forms and Events.
To add a new mapping, click the Add New Mapping button and then select the Mapping Type from the drop-down.
For example, if you’d like to export data for a specific form, select Standard Qgiv Form > Form from the drop-down menu. Then, use the Form drop-down to select the form.
If you’d like to exclude the Qgiv data from your exports, check the box labeled Exclude from Export.
Excluding can be useful for something like a $0 category for a peer-to-peer campaign.
If you’d like to export the data to Kindful, do not check the box, and then select the destination Fund and Campaign.
When you’ve configured your mapping, click Add Mapping.
You can Edit or Delete a mapping by clicking the three dots at the right side of the mappings table.
If you’d like to delete multiple mappings, check the box next to the mapping’s names, and then click Delete Mappings at the top of the table.
The process is similar for each data set shown in the Optional Mappings area. There may be some slight variations in how many choices you have in each drop-down.
For example, if you’re mapping restrictions, you’ll see another drop-down menu, and still another if you’ve set up sub-restrictions.
When mapping events, you’ll be given the option to drill all the way down to event packages, if desired.
You can also map text campaigns:
Peer-to-peer events just require a form selection and export destination.
You can choose to export other peer-to-peer data, as well.
Peer-to-Peer Classifications
Peer-to-Peer Categories
Peer-to-Peer Restrictions
Peer-to-Peer Store Purchases
You can also map auction transactions.
Auction
Auction Restriction
Auction Package
Auction Item
Custom Mappings
You can also add Custom Mappings. You may already have similar mapping set up through the Extra Info fields. If you don't want this information to appear in both places, be sure to delete the Extra Info mappings once you set up your custom mappings.
Custom mappings allow you to dictate which target objects and fields you want data to go into in the integration. Custom fields must be active in the destination before you can map to them from Qgiv. There are three custom mapping types: static, custom field, and standard field. For each type, you can map to a target object + field using the data from that custom type. See the attached standard field mappings spreadsheet for details.
In addition to any user created custom fields, an org can also map to these Kindful standard fields:
| Employer* |
| Birthday |
| Retired or Not Employed |
| Gender |
| Alt. Phone Number |
| Alt. Email |
| Spouse First Name |
| Spouse Last Name |
| Occupation |
| Fax |
Note that Users cannot map to the Employer static field. However, Qgiv's employer field settings will automatically map to that field.
Static
With static field mappings, you can add static values in Qgiv to target records in the integration service.
Custom Field
With custom field mappings, you can map custom field answers in Qgiv to target fields based on unique custom field reporting labels. For example, you can track custom fields for your fundraising events, such as gathering meal choices.
Standard Field
With standard field mappings, you can map standard field values to a target field.
Some values will be specific to a transaction line item (e.g. restriction name), while others will be for the entire transaction (e.g. transaction ID).
Click here to download a spreadsheet that details all Service Integration Standard Field mappings.
Please note: If you try to map to the same target object + field (regardless of the type), we will only save the most recent mapping.
Don't forget to save your work!
Running an Export and Export History
When you’re ready to run an export, click Export, which is located in the upper-right corner of your settings window. This is only necessary if you chose the Manual export option.
Otherwise, Hourly exports are scheduled to run once per hour at 15 minutes past the hour, but they are not guaranteed to run at exactly 15 minutes past. Actual run times depend on the server load. Daily exports will run at the time you chose.
IMPORTANT: If you're exporting for the first time or have a large number of transactions to bring over, we'd recommend setting your export start and end dates to export one week at a time to avoid hitting API limits.
You’ll receive a message in a pop-up alerting you that your export was completed. If successful, you’ll see the following:
Clicking View Export History will open the Export History Report, but will display only the records associated with this export.
If there were any issues during the export, you’ll see a message similar to the following:
At the top of your integration management screen, you’ll see an Export History tab. Here, you’ll see some basic information about your past exports, including the Export ID, Date and Time, Status, and Total Transactions.
Clicking the Export ID will take you to the more detailed Export History report, filtered by the transactions that were exported in that batch.
To view the full Export History report, click View All Export History.
When you do so, you’ll open the Export History Report, which includes a table which details all exported records across your service integrations.
In the Export History Report you may notice an icon that looks like the outline of a person with a plus sign. This means a new record was created as the result of a new donor or registrant.
Additionally, you may notice an additional alert icon in the Export Status column. Hover over the icon to see more details. The message will also display in the Export History Report.
Follow the link to learn more about the Export History Report.
Because Kindful handles duplicate contact matching, Qgiv has no way to determine if a new contact was created. Duplicates are checked for based on the following: First Name + Last Name + Email OR Company Name + Email.
Kindful transactions have an “Allow Public Name Display” field that is not accessible via the API, so you may see an “Anonymous” entry added to the Admin Note field when applicable.
Kindful contacts do not have a concept of opting in to communication, so that value does not get transferred over.
Facebook Fundraisers Transactions imported to Kindful are given the Credit Card transaction type.
Backing Up, Re-Authenticating, or Deleting the Integration
If you have a lot of optional mappings, you may want to back them up to a CSV file. This is useful if you need to deactivate a service or adjust your connection and want to make sure your mappings are safe.
Click the Mappings Backup link to access the Mappings Backup & Recovery settings.
From here, you can download your mappings as a CSV file, as well as upload a previously downloaded backup file.
The Re-authenticate link lets users reconfirm their integration credentials or enter credentials for a different account.
When you click Re-authenticate, you'll be prompted to Activate the integration or Cancel the reauthentication process. Clicking cancel keeps the integration set up the way it was before clicking Re-authenticate.
If this service integration is no longer needed, it can be deleted by clicking Delete Integration in the left-hand navigation.
You'll be prompted to confirm your choice to delete the integration by typing the word DELETE.
After deleting the service integration, if you need to re-enable it you can reconnect just like when you originally set up the service integration.
To save you time and prevent you from accidentally creating duplicate records, you'll be prompted to Restore export history when you establish your integration again. Note that this will not import any past integration settings. If you would rather start with a clean slate, select Start from scratch instead.
Enabling the Service Integrations Notification
To be notified via email when a service integration becomes inactive, the integration is locked for an extended period, or a transaction fails to export, you can turn on the Service Integrations notification.
To manage notifications, navigate to the Notifications area of your org-level control panel.
Click Manage for each user you’d like to receive the notification.
Then, search for Service Integrations at the top of the screen, or scroll down to Service Integrations in the System Notifications section.
Check the box next to the notification to activate it.
Scroll to the bottom of the screen and click Save Settings to save your changes.